Guide to @ConfigurationProperties in Spring Boot

1. Introduction

Spring Boot has many useful features including externalized configuration and easy access to properties defined in properties files. An earlier tutorial described various ways in which this could be done.

We are now going to explore the @ConfigurationProperties annotation in greater detail.

Further reading:

A Quick Guide to Spring @Value

Learn to use the Spring @Value annotation to configure fields from property files, system properties, etc.

Properties with Spring and Spring Boot

Tutorial for how to work with properties files and property values in Spring.

2. Setup

This tutorial uses a fairly standard setup. We start by adding [*spring-boot-starter-parent*]( AND g:org.springframework.boot) as the parent in our pom.xml:


To be able to validate properties defined in the file, we also need an implementation of JSR-303, and [*hibernate-validator*]( AND g:org.hibernate) is one of them.

Let's add it to our pom.xml as well:


The “Getting Started with Hibernate Validator” page has more details.

3. Simple Properties

The official documentation advises that we isolate configuration properties into separate POJOs*.*

So let's start by doing that:

@ConfigurationProperties(prefix = "mail")
public class ConfigProperties {

private String hostName;
private int port;
private String from;

// standard getters and setters

We use @Configuration so that Spring creates a Spring bean in the application context.

***@ConfigurationProperties* works best with hierarchical properties that all have the same prefix;** therefore, we add a prefix of mail.

The Spring framework uses standard Java bean setters, so we must declare setters for each of the properties.

Note: If we don't use @Configuration in the POJO, then we need to add @EnableConfigurationProperties(ConfigProperties.class) in the main Spring application class to bind the properties into the POJO:

public class EnableConfigurationDemoApplication {
public static void main(String[] args) {, args);

That's it! Spring will automatically bind any property defined in our property file that has the prefix *mail* and the same name as one of the fields in the *ConfigProperties* class.

Spring uses some relaxed rules for binding properties. As a result, the following variations are all bound to the property hostName:


Therefore, we can use the following properties file to set all the fields:

#Simple properties

3.1. Spring Boot 2.2

As of Spring Boot 2.2, Spring finds and registers *@ConfigurationProperties* classes via classpath scanning. Therefore, there is no need to annotate such classes with *@Component* (and other meta-annotations like @Configuration), or even use the *@EnableConfigurationProperties:*

@ConfigurationProperties(prefix = "mail") 
public class ConfigProperties {

private String hostName;
private int port;
private String from;

// standard getters and setters

The classpath scanner enabled by @SpringBootApplication finds the ConfigProperties class, even though we didn't annotate this class with @Component.

In addition, we can use the *@ConfigurationPropertiesScan* annotation to scan custom locations for configuration property classes:

public class EnableConfigurationDemoApplication {

public static void main(String[] args) {, args);

This way Spring will look for configuration property classes only in the package.

4. Nested Properties

We can have nested properties in *Lists, Maps,* and *Classes.*

Let'S create a new Credentials class to use for some nested properties:

public class Credentials {
private String authMethod;
private String username;
private String password;

// standard getters and setters

We also need to update the ConfigProperties class to use a List, a Map, and the Credentials class:

public class ConfigProperties {

private String host;
private int port;
private String from;
private List<String> defaultRecipients;
private Map<String, String> additionalHeaders;
private Credentials credentials;

// standard getters and setters

The following properties file will set all the fields:

#Simple properties

#List properties

#Map Properties

#Object properties

5. Using *@ConfigurationProperties* on a *@Bean* Method

We can also use the *@ConfigurationProperties* annotation on *@Bean*-annotated methods.

This approach may be particularly useful when we want to bind properties to a third-party component that's outside of our control.

Let's create a simple Item class that we'll use in the next example:

public class Item {
private String name;
private int size;

// standard getters and setters

Now let's see how we can use @ConfigurationProperties on a @Bean method to bind externalized properties to the Item instance:

public class ConfigProperties {

@ConfigurationProperties(prefix = "item")
public Item item() {
return new Item();

Consequently, any item-prefixed property will be mapped to the Item instance managed by the Spring context.

6. Property Validation

***@ConfigurationProperties* provides validation of properties using the JSR-303 format.** This allows all sorts of neat things.

For example, let's make the hostName property mandatory:

private String hostName;

Next, let's make the authMethod property from 1 to 4 characters long:

@Length(max = 4, min = 1)
private String authMethod;

Then the port property from 1025 to 65536:

private int port;

Finally, the from property must match an email address format:

@Pattern(regexp = "^[a-z0-9._%+-]+@[a-z0-9.-]+\\.[a-z]{2,6}$")
private String from;

This helps us reduce a lot of if – else conditions in our code, and makes it look much cleaner and more concise.

If any of these validations fail, then the main application would fail to start with an *IllegalStateException*.

The Hibernate Validation framework uses standard Java bean getters and setters, so it's important that we declare getters and setters for each of the properties.

7. Property Conversion

@ConfigurationProperties supports conversion for multiple types of binding the properties to their corresponding beans.

7.1. *Duration*

We'll start by looking at converting properties into Duration objects*.*

Here we have two fields of type Duration:

@ConfigurationProperties(prefix = "conversion")
public class PropertyConversion {

private Duration timeInDefaultUnit;
private Duration timeInNano;

This is our properties file:


As a result, the field timeInDefaultUnit will have a value of 10 milliseconds, and timeInNano will have a value of 9 nanoseconds.

The supported units are *ns, us, ms, s, m, h* and *d* for nanoseconds, microseconds, milliseconds, seconds, minutes, hours, and days, respectively.

The default unit is milliseconds, which means if we don't specify a unit next to the numeric value, Spring will convert the value to milliseconds.

We can also override the default unit using @DurationUnit:

private Duration timeInDays;

This is the corresponding property:


7.2. *DataSize*

Similarly, Spring Boot *@ConfigurationProperties* supports *DataSize* type conversion.

Let's add three fields of type DataSize:

private DataSize sizeInDefaultUnit;

private DataSize sizeInGB;

private DataSize sizeInTB;

These are the corresponding properties:


In this case, the *sizeInDefaultUnit* value will be 300 bytes, as the default unit is bytes.

The supported units are B, KB, MB, GB, and TB. We can also override the default unit using @DataSizeUnit.

7.3. Custom *Converter*

We can also add our own custom Converter to support converting a property to a specific class type.

Let's add a simple class Employee:

public class Employee {
private String name;
private double salary;

Then we'll create a custom converter to convert this property:


We will convert it to a file of type Employee:

private Employee employee;

We will need to implement the Converter interface, then use *@ConfigurationPropertiesBinding* annotation to register our custom Converter:

public class EmployeeConverter implements Converter<String, Employee> {

public Employee convert(String from) {
String[] data = from.split(",");
return new Employee(data[0], Double.parseDouble(data[1]));

8. Immutable @ConfigurationProperties Binding

As of Spring Boot 2.2, we can use the *@ConstructorBinding* annotation to bind our configuration properties.

This essentially means that @ConfigurationProperties-annotated classes may now be immutable.

@ConfigurationProperties(prefix = "mail.credentials")
public class ImmutableCredentials {

private final String authMethod;
private final String username;
private final String password;

public ImmutableCredentials(String authMethod, String username, String password) {
this.authMethod = authMethod;
this.username = username;
this.password = password;

public String getAuthMethod() {
return authMethod;

public String getUsername() {
return username;

public String getPassword() {
return password;

As we can see, when using @ConstructorBinding, we need to provide the constructor with all the parameters we'd like to bind.

Note that all the fields of ImmutableCredentials are final. Also, there are no setter methods.

Furthermore, it's important to emphasize that to use the constructor binding, we need to explicitly enable our configuration class either with *@EnableConfigurationProperties* or *with @ConfigurationPropertiesScan*.

9. Java 16 records

Java 16 introduced the record types as part of JEP 395. Records are classes that act as transparent carriers for immutable data. This makes them perfect candidates for configuration holders and DTOs. As a matter of fact, we can define Java records as configuration properties in Spring Boot. For instance, the previous example can be rewritten as:

@ConfigurationProperties(prefix = "mail.credentials")
public record ImmutableCredentials(String authMethod, String username, String password) {

Obviously, it's more concise compared to all those noisy getters and setters.

Moreover, as of Spring Boot 2.6, for single-constructor records, we can drop the *@ConstructorBinding* annotation. If our record has multiple constructors, however, @ConstructorBinding should still be used to identify the constructor to use for property binding.

10. Conclusion

In this article, we explored the @ConfigurationProperties annotation and highlighted some of the useful features it provides, like relaxed binding and Bean Validation.

As usual, the code is available over on Github.